Tonichi Kyosan Flat Braided Tin Plated Copper Wire TBC We sell cut pieces in 1m units and fixed lengths of 100m in our shop. Tohnichi Kyosan sizes are 5.5SQ / 8.0SQ / 14SQ / 22SQ / 38SQ / 60SQ / 100SQ. Meiko Futaba sells 1.25SQ / 2.0SQ / 3.5SQ. The normal lead time is 1 week. Flat braided copper wire is used as an electrical conductor or electromagnetic shield, which requires flexibility. Please order from the product page below.

◇Manufacturer site
https://www.tonichi-kyosan.co.jp/product/insulation_tbc/index.html

◇Product page
https://nisho-en.ocnk.net/product-list/148

TBC 5.5SQ

TBC 14SQ

TBC 22SQ

Hirose Electric MIL standard compliant ribbon cable connector HIF3B series flat cable harness. The product in the image uses the HIF3BA-34D-2.54R(63) connector and the Oki Electric Cable 1.27mm pitch bridge type FLEX-B 34-7/0.127 2651P flat cable.

◇Connector
HIF3BA-10D-2.54R(63) / HIF3BA-14D-2.54R(63) / HIF3BA-16D-2.54R(63)
HIF3BA-20D-2.54R(63) / HIF3BA-26D-2.54R(63) / HIF3BA-30D-2.54R(63)
HIF3BA-34D-2.54R(63) / HIF3BA-40D-2.54R(63) / HIF3BA-50D-2.54R(63)
HIF3BB-50D-2.54R(63) / HIF3BA-60D-2.54R(63) / HIF3BB-60D-2.54R(63)
HIF3BA-64D-2.54R(63) / HIF3BB-64D-2.54R(63)

◇Manufacturer site
HRS HIF3B series
https://www.hirose.com/ja/product/series/HIF3B

This is a wire harness for the CB01 series, a 2.5mm pitch waterproof connector for relays from Minebea Connect (formerly Sumiko Tech). The CB01 series is a small, highly reliable 2.5mm pitch waterproof connector. The terminal is pressed into the wire seal built into the connector and held in place by a retainer to ensure waterproofing. The product in the image uses CB01A5-03B0-02 for the relay M housing, CB01C5-020A for the M terminal, CB01E0-01N0 for the waterproof plug, and UL1007 AWG22 for the cable. The cable is covered with a shrink tube.

M housing　　　　　　　　　　　　　　　　　　　　　　　Wire seal
CB01A5-02B0-01 / CB01A5-03B0-01 / CB01A5-05B0-01　φ1.0～1.3 Yellow
CB01A5-02B0-02 / CB01A5-03B0-02 / CB01A5-05B0-02　φ1.3～1.7 Orange
M terminal
CB01C5-010A　AWG22～28　φ1.6 max　M
CB01C5-020A　AWG20～22　φ1.7 max　M

◇Manufacturer site
https://www.minebea-c.com/product/waterproof-connetctor/
https://www.minebea-c.com/.assets/MCI_waterproof_CB01.pdf

This is a flat cable harness for the KEL 1.27mm pitch low profile connector 8925E / 8925R series. The product in the image uses the connector 8925R-050-179-F without strain relief and the cable Oki Electric Cable High Density 0.635mm Pitch Flat Cable Bridge Type FLEX-B2 50-7/0.1 20028.

◇Connectors
With strain relief:
8925E-020-179-F / 8925E-030-179-F / 8925E-040-179-F / 8925E-050-179-F
8925E-060-179-F / 8925E-068-179-F / 8925E-080-179-F / 8925E-100-179-F

Without strain relief:
8925R-020-179-F / 8925R-030-179-F / 8925R-040-179-F / 8925R-050-179-F
8925R-060-179-F / 8925R-068-179-F / 8925R-080-179-F / 8925R-100-179-F

◇KEL 8925E series manufacturer site
https://www.kel.jp/product/product_detail/id=490&p_cont=49

◇Oki Electric Cable 0.635mm half pitch Okiflex (UL20028) manufacturer site
https://www.okidensen.co.jp/en/prod/cable/flat/koumitsudo_okiflex.html

Dyden Robotop DP-SB 300V UL2517 DP3-SB/2517 with shield, some products are sold in our shop. Standard delivery time is 1-2 weeks. Sales units are 5m units of 10m or more. Please purchase from the product page below.

◇Normally in stock
ROBOTOP DP3-SB/2517 AWG22(0.3SQ)×2C
ROBOTOP DP3-SB/2517 AWG20(0.5SQ)×3C
ROBOTOP DP3-SB/2517 AWG18(0.75SQ)×2C
ROBOTOP DP3-SB/2517 AWG18(0.75SQ)×3C
ROBOTOP DP3-SB/2517 AWG18(0.75SQ)×4C
ROBOTOP DP3-SB/2517 AWG16(1.25SQ)×2C
ROBOTOP DP3-SB/2517 AWG14(2SQ)×4C

◇Manufacturer site
https://cable.dyden.co.jp/products/786/
https://www.dyden.jp/robotcable/list/robotop_dp/

◇Product page
https://nisho-en.ocnk.net/product-list/93

Compliant standards
＜DP3＞
UL758(Appliance Wiring Material) -2517(105℃, 300V)
CSA(CC22.2 No210.2) - (105℃, 300V)
Specific electrical equipment/heat-resistant, earthquake-resistant vinyl cab tire cord (75℃, 300V)

Core identification method

This is a wire harness for JST ultra-small 0.8mm pitch SUH connector for board-to-wire. Housings are available with handle: SUHR-**V-S-B and without handle: SUHR-**V-S. The product in the image uses SUHR-04V-S-B for the housing, SSUH-003T-P0.15 for the contacts, and OKI Electric Cable thin diameter for movable parts UL11527 AWG28 Φ0.6mm for the cable.

◇Housing
With handle:
SUHR-02V-S-B / SUHR-03V-S-B / SUHR-04V-S-B / SUHR-05V-S-B / SUHR-06V-S-B / SUHR-08V-S-B
SUHR-10V-S-B / SUHR-12V-S-B / SUHR-14V-S-B / SUHR-16V-S-B / SUHR-17V-S-B / SUHR-20V-S-B

Without handle:
SUHR-02V-S / SUHR-03V-S / SUHR-04V-S / SUHR-05V-S / SUHR-06V-S
SUHR-10V-S / SUHR-12V-S / SUHR-14V-S / SUHR-16V-S / SUHR-20V-S

◇Contact AWG32-28 φ0.5-0.6
SSUH-003T-P0.15

◇JST SUH Connector
https://www.jst-mfg.com/product/detail.php?series=605

◇Oki Electric Cable UL11527 AWG28 Thin Outer Diameter 0.60mm Product Page
https://nisho-en.ocnk.net/product/168

This is an integrally molded cable harness for a 2.5mm 3-pole straight stereo mini plug. The product in the image uses a 2.5mm 3-pole straight stereo mini plug for the plug and Nagaoka Electric Wire CIC-HR 0.2SQ×2C for the cable. The CIC-HR cable is oil-resistant, heat-resistant, flame-retardant, and non-migratory.

◇Nagaoka Electric Wire CIC-HR / SCIC-HR
https://www.e-nagaoka.com/hinmoku/cic-hr/index.htm

Minebea Connect (formerly Sumitomo Tech) 5.8mm pitch relay waterproof connector CL07D series wire harness. The CL07D series is a dustproof and waterproof connector (IP67 certified product) that supports high current (10AMax) with a 5.8mm pitch. The product in the image uses relay M housing CL07D02M for the connector, 215001-2M for 0.3 to 0.5SQ (AWG22 to 20) for the terminal, WS07MF-0A for the wire seal, and UL1007 AWG22 for the cable.

◇M housing for relay
CL07D01M / CL07D02M / CL07D03M

◇Manufacturer site
https://www.minebea-c.com/.assets/cl07dge.pdf

This is a wire harness for KEL's 1.27mm pitch low profile connector 8925E / 8925R series. The product in the image uses the connector with strain relief 8925E-080-179-F and the cable Oki Electric Cable .635mm pitch flat cable bridge type FLEX-B2 80-7/0.1 20028.

◇Connectors
With strain relief:
8925E-020-179-F / 8925E-030-179-F / 8925E-040-179-F / 8925E-050-179-F
8925E-060-179-F / 8925E-068-179-F / 8925E-080-179-F / 8925E-100-179-F

Without strain relief:
8925R-020-179-F / 8925R-030-179-F / 8925R-040-179-F / 8925R-050-179-F
8925R-060-179-F / 8925R-068-179-F / 8925R-080-179-F / 8925R-100-179-F

◇KEL 8925E series manufacturer site
https://www.kel.jp/product/product_detail/id=490&p_cont=49

◇Oki Electric Cable 0.635mm half pitch Okiflex (UL20028) manufacturer site
http://www.okidensen.co.jp/en/prod/cable/flat/koumitsudo_okiflex.html

JST 2.0mm pitch 2-row secure lock board-to-wire PAD connector wire harness. The product in the image uses PADP-12V-1-S for the housing, SPH-001T-P0.5L for the contacts, and UL1007 AWG22 for the cable.

◇Housing
PADP-10V-1-S / PADP-12V-1-S / PADP-14V-1-S / PADP-16V-1-S
PADP-20V-1-S / PADP-22V-1-S / PADP-24V-1-S / PADP-40V-1-S

◇Contacts
SPH-001T-P0.5L AWG26-22 φ1.0-1.5
SPH-002T-P0.5L AWG28-24 φ0.8-1.5

SPND-001T-C0.5 AWG26-22 φ1.0-1.5
SPND-002T-C0.5 AWG28-24 φ0.76-1.5
*Improved insertion/removal workability type

◇Manufacturer site
https://www.jst-mfg.com/product/index.php?series=191

Bando Electric Wire's Omron Controller Link cable ESVC 0.5SQ×2C is sold in our shop in cut lengths of 10m or more in 1m increments and in 1 roll = 100m increments. This cable is dedicated to high-capacity communication networks used in Omron FA network controller links. The normal lead time is one week. Please order from the product page below.

◇Product page
https://nisho-en.ocnk.net/product/1306

Nikko Electric Wire Industries NSKVG (unshielded) and NSKVG-S (shielded) are flexible, bendable, non-migratory, heat-resistant, cold-resistant (+90℃ to -35℃), and oil-resistant cables. Suitable for internal and external wiring of measuring instruments, communication devices, etc. RoHS2 compliant.

Size: 0.2SQ, 0.3SQ, 0.5SQ
Number of cores: 2 to 60 cores

◇Product page
NSKVG Unshielded
https://nisho.ocnk.net/product-list/372

NSKVG-S Shielded
https://nisho.ocnk.net/product-list/373

Sensor NSKVG
https://nisho.ocnk.net/product-list/374

◇Catalog

NSKVG-S 0.2SQ×4C

NSKVG 0.2SQ×16C

OKI Electric Cable UL1571 AWG28 white thin diameter outer diameter 0.58mm in stock. Sold in cut lengths starting from 1m. In addition to white, black, red, gray, and blue are also available in 1m increments. The standard UL1571 AWG28 is φ0.88mm, but the thin diameter is φ0.58mm. This is a wire with an insulator outer diameter of φ0.58 used inside the multi-core cable UL20276 AWG28. This cable is compatible with crimp terminals of φ0.5 to 0.6mm from each manufacturer. Can be used with JST ACH connector SACH-003G-P0.2, SUH connector SSUH-003T-P0.15, HRS DF52-2832PCF, DF57-2830SCF, DF58-2830SCF, etc. RoHS2 compliant.

◇Product page
https://nisho-en.ocnk.net/product/167

Hanshin Electric Wire Robot Cable for Wiring Moving Parts, MRC UL20276, UL2464, UL2501 Shielded, Unshielded. Available in fixed lengths of 100m and cut lengths of 1m and up at our shop. The product in the image is MRC UL20276 AWG24×2C. Please visit the product page to purchase.

◇Manufacturer's website
http://www.hanshin-cable.co.jp/

◇Product page
https://nisho-en.ocnk.net/product-list/80

MRC UL20276 AWG24×2C

We sell Proterial (ex- Hitachi Metals) Fluororex Electric Wire 600V LFF Black in our shop. Sizes are 0.5SQ, 0.75SQ, 1.25SQ, 2SQ, 3.5SQ, 5.5SQ, 8SQ, 14SQ, 22SQ, and 38SQ. Normal delivery time is one week. Rated: 200℃, 600V. This electric wire has excellent heat resistance, flexibility, oil resistance, and flame retardancy. Please purchase from the product page below.

◇Product page
https://nisho-en.ocnk.net/product-list/109

600V LFF 2SQ Black

This is a cable harness for the JST 2.0mm pitch secure lock connector PA series. The product in the image uses PAP-04V-S for the housing, SPHD-002T-P0.5 for the contacts, and Oki Electric Cable ultra-thin robot cable ORP-30F AWG24×4C(21103) for the cable.

◇Housing PAP-02V-S / PAP-03V-S / PAP-04V-S / PAP-05V-S / PAP-06V-S PAP-07V-S / PAP-08V-S / PAP-09V-S / PAP-10V-S / PAP-11V-S PAP-12V-S / PAP-13V-S / PAP-14V-S / PAP- 15V-S/ PAP-16V-S

◇Contact
SPHD-001T-P0.5 AWG26-22 φ1.0-1.5
SPHD-002T-P0.5 AWG28-24 φ0.76-1.5

◇Manufacturer site
JST PAP connector
https://www.jst-mfg.com/product/index.php?series=189

Oki Electric Cable Ultra-thin robot cable ORP-30F
https://www.okidensen.co.jp/jp/prod/cable/robot/orp30f.html

Ninomiya Electric Wire Fluororesin-coated thermocouple wire FEP (6F) Maximum operating temperature: 200°C. This is a flat-coated thermocouple wire insulated with fluororesin for each pair of thermocouple conductors and covered with fluororesin as a sheath. We sell it in units of 1 roll = 100m at our shop. The standard delivery time is 3 to 4 days as it is a manufacturer-ordered item. The product in the image is 0.32 x 1P K-2-6F-J2 (K-6F). Please order from the address link below.

◇Manufacturer's site
https://ninomiya-ew.co.jp/en/product/tcw_fep/

◇Product page
https://nisho-en.ocnk.net/product-list/128

　

TE D-2000 Series D-2 Tab Contact M 1318109-1 / 1318111-1 Crimp Wire Harness. The product in the image uses 1-1318114-6 for the D-2100D tab housing panel type, 1318109-1 for the tab contact M, and UL1007 AWG22 for the cable.

◇D-2 Tab Contact M
1318109-1 Reel product
https://www.te.com/en/product-1318109-1.html

1318111-1 Loose product
https://www.te.com/en/product-1318111-1.html

JST 1.2mm pitch small low profile ACHL connector wire harness. ACHL connectors are compatible with stacking heights of 1.2 and rated currents of up to 2A (AWG28). The product in the image uses ACHLR-02V-S for the housing, SACHL-003G-P0.2 for the contacts, and UL3767 AWG28 φ0.60 for the cable.

◇Housing
ACHLR-02V-S

◇Contact　SACHL-003G-P0.2　AWG30-28　Φ0.50-0.63mm

◇Manufacturer's website
https://www.jst-mfg.com/product/index.php?series=563

This is a wire harness for the JST 0.8mm pitch insulation displacement small low profile connector **SUR-32S. The SUR connector is a small connector with a PCB mounting height of 1.75mm and a depth of 3.9mm (side) and a PCB mounting height of 3.9mm and a depth of 2.2mm (top). The product in the image uses 08SUR-32S for the connector and Sumitomo Electric UL1867 AWG32 black for the cable.

◇Connectors
02SUR-32S / 03SUR-32S / 04SUR-32S / 05SUR-32S / 06SUR-32S / 08SUR-32S / 10SUR-32S
12SUR-32S / 14SUR-32S / 15SUR-32S / 16SUR-32S / 17SUR-32S / 20SUR-32S / 22SUR-32S

◇JST SUR series manufacturer site
https://www.jst-mfg.com/product/index.php?series=246

◇Cables
Sumitomo Electric UL1867 AWG32
https://sei.co.jp/ewp/J/products/detail/pdf/1_1867_PITCH.pdf