Hirose Electric Square Multi-Pole Rack/Panel Crimp Connector QR/P Series Wire Harness. The product in the image uses QR/P-16S-C(21) for the female housing, QR/P-XC-221(12) for the AWG18-24 contact, and UL1007 AWG18 for the cable. The contacts are shared by both male and female connectors.

◇Female housing
QR/P-4S-C(21) / QR/P-8S-C(21) / QR/P-12S-C(21) / QR/P-16S-C(21) / QR/P-24S-C(21)

◇Contact　AWG18-24
QR/P-XC-221(12)　 Reel
QR/P-XC-121(12) 　Loose

◇Manufacturer site
https://www.hirose.com/en/product/series/QR__P

This is a cable harness using the JST ultra-small 0.8mm pitch SUH connector. The housings are available with a handle (SUHR-**V-S-B) or without a handle (SUHR-**V-S). The housing shown in the image is the SUHR-05V-S, the contact is the SSUH-003T-P0.15, and the cable used is Mogami Electric’s ultra-flexible, ultra-fine cable AWG32×2C with shielding (2490). Additionally, the shielded joint wire uses Okiden Cable's 1-core robot cable UL11527 AWG28, fine diameter with an outer diameter of 0.60mm.

◇Housing
With handle:
SUHR-02V-S-B / SUHR-03V-S-B / SUHR-04V-S-B / SUHR-05V-S-B / SUHR-06V-S-B / SUHR-08V-S-B
SUHR-10V-S-B / SUHR-12V-S-B / SUHR-14V-S-B / SUHR-16V-S-B / SUHR-17V-S-B / SUHR-20V-S-B

Without handle:
SUHR-02V-S / SUHR-03V-S / SUHR-04V-S / SUHR-05V-S / SUHR-06V-S
SUHR-10V-S / SUHR-12V-S / SUHR-14V-S / SUHR-16V-S / SUHR-20V-S

◇Contact
SSUH-003T-P0.15 AWG32-28 φ0.5-0.6

◇JST SUH Connector
https://www.jst-mfg.com/product/index.php?series=605

◇Mogami Ultra-flexible, ultra-thin cable
https://www.mogami-wire.co.jp/product/u-m-cable.html

◇Oki Electric Cable UL11527 AWG28 Thin outer diameter 0.60mm Product page
https://nisho-en.ocnk.net/product/168

OKI Electric Cable's OKIFLEX with sheath is a cable made by rolling up a sudare-type flat cable and covering it with a PVC outer sheath. Available in V: unshielded and SV: shielded. 3030 is 30mm of unfused section and 30mm of fused section. SB indicates the sheath color is warm gray. Sold in units of 1 roll = 100m at our shop. Standard manufacturer stock item.

◇Manufacturer site
https://www.okidensen.co.jp/en/prod/cable/tashin/sisu_okiflex.html

◇Product page
FLEX-S **-7/0.127 3030-V(20266)SB　Unshielded
https://nisho-en.ocnk.net/product-list/18

FLEX-S **-7/0.127 3030-SV(20266)SB　Shielded
https://nisho-en.ocnk.net/product-list/19

FLEX-S 26-7/0.127 3030-V (20266) SB

OKI Electric Cable's small outer diameter, highly flexible robot cable, ORP Slim series, is sold in units of 100m per roll at our shop. It is the thinnest robot cable in Japan, and is easy to handle for moving parts. Please order from the product page below.

◇Manufacturer's website
https://www.okidensen.co.jp/en/prod/cable/robot/

◇Product page
ORP slim (UL2464) With shielding(SB)
https://nisho-en.ocnk.net/product-list/44

ORP slim (UL2464) Without shielding
https://nisho-en.ocnk.net/product-list/45

ORP slim (UL2464) Layer-twisted Without shielding
https://nisho-en.ocnk.net/product-list/50

ORP-SL 0.1SQ×5C(2464） Layer-twisted Without shielding

This cable is available in cut pieces (10 meters or more, in 1-meter increments) and fixed length of 100 meters at our shop. The CO-HC-ESV 7/0.2×3P is the recommended cable for Omron PLC's RS-422A / 485. The rated temperature is 60°C, and the rated voltage is 125V. The typical lead time is 1 week. Please place your order from the product page below.

◇ Manufacturer’s Website
https://www.hewtech.co.jp/en/products/cable-lineup/detail/Interface/Interface_P15.html

◇ Product Page
https://nisho-en.ocnk.net/product/1304

JST 3.96mm pitch PCB direct-mount type SDN connector wire harness. The product in the image uses 8P-SDN for the housing, SDN-21T-P1.5 for the contacts, and UL1007 AWG18 for the cable. The SDN connector is a large-capacity, low-profile, thin board-in connector that can connect a wide range of circuits, from signal circuits to power circuits.

◇Housing
With polarity boss
2P-SDN / 3P-SDN / 4P-SDN / 5P-SDN / 6P-SDN / 7P-SDN
8P-SDN / 9P-SDN / 10P-SDN / 11P-SDN / 12P-SDN

Without polarity boss
2P-SDN-A / 3P-SDN-A / 4P-SDN-A / 5P-SDN-A / 6P-SDN-A / 7P-SDN-A
8P-SDN-A / 9P-SDN-A / 10P-SDN-A / 11P-SDN-A / 12P-SDN-A

◇Contact
SDN-21T-P1.5 AWG22-18 φ1.6～3.0mm

◇Manufacturer site
https://www.jst-mfg.com/product/index.php?series=228

JST 2.5mm pitch EH connector wire harness for board-to-wire connection. The product in the image uses EHR-3 for the housing, SEH-001T-P0.6 for the contacts, and UL1007 AWG22 for the cable.

◇Housing
EHR-2 / EHR-3 / EHR-4 / EHR-5 / EHR-6
EHR-7 / EHR-8 / EHR-9 / EHR-10 / EHR-11
EHR-12 / EHR-13 / EHR-14 / EHR-15

◇Contact
SEH-001T-P0.6　AWG30～22　1.0～1.9mm

◇Manufacturer's website
https://www.jst-mfg.com/product/index.php?series=58

OKI Electric Cable MIL standard 2.54mm pitch FL connector socket flat cable harness. The product in the image uses FL26A2FO for the connector and ELEX-S 26-7/0.127 7030 2651P for the cable.

◇Socket connector
FL10A2FO / FL10A2FOG / FL14A2FO / FL16A2FO / FL20A2FO
FL26A2FO / FL30A2FO / FL34A2FO / FL40A2FO / FL50A2FO
FL50A2FOG / FL60A2FO / FL60A2FOG / FL64A2FO

◇FL connector｜MIL-compliant IDC connector for flat cables
https://nisho-en.ocnk.net/product-list/99

Ninomiya Electric Wire Industry Nickel-Clad Copper Conductor Silica Glass Braided Wire TN430, sold in our shop in cut pieces of 10m or more in 1m increments, fixed length 1 roll = 100m. Sizes are 0.75SQ, 1.25SQ, 2.0SQ, 3.5SQ, and 5.5SQ. TN430 is a heat-resistant wire made of a nickel-clad copper conductor with excellent heat resistance, corrosion resistance, and flexibility, wrapped in a glass-mica-polyimide composite tape and coated with silica glass fiber. The insulator is coated with polyimide paint (brownish brown) with excellent insulating properties. RoHS2 compliant, maximum operating temperature: 400℃. The product in the image is a TN430 3.5SQ cut product. Please purchase from the product page below.

◇Manufacturer site
https://ninomiya-ew.co.jp/en/product/hrw_tn430/

◇Product page
https://nisho-en.ocnk.net/product-list/123

TN430 3.5SQ

This is a crimp wire harness for TE M3 round terminal 2-31090-1. The cable uses UL1007 AWG16.

◇SOLISTRAND Budget
Model: 2-31090-1
Wire size (AWG): 22 - 16
Wire size (mm²): 0.3 – 1.42
Wire size (CMA): 509 – 3260
Stud size: M3

◇Manufacturer site
https://www.te.com/en/product-2-31090-1.html

JAE Japan Aviation Electronics 2.5mm pitch single row crimp board-to-cable connector IL-G series wire harness. The product in the image uses IL-G-4S-S3C2-SA for the housing, IL-G-C2-SC-10000 for the contacts, and UL1007 AWG22 for the cable.

◇Housing: 2 to 15 pins
IL-G-2S-S3C2-SA / IL-G-3S-S3C2-SA / IL-G-4S-S3C2-SA / IL-G-5S-S3C2-SA / IL-G-6S-S3C2-SA
IL-G-7S-S3C2-SA / IL-G-8S-S3C2-SA / IL-G-9S-S3C2-SA / IL-G-10S-S3C2-SA / IL-G-11S-S3C2-SA
IL-G-12S-S3C2-SA / IL-G-13S-S3C2-SA / IL-G-14S-S3C2-SA / IL-G-15S-S3C2-SA

◇Contact
IL-G-C2-SC-10000　　AWG28～22 φ1.0～1.7mm

◇Manufacturer's website
https://www.jae.com/en/connectors/series/detail/id=64296&type_code=T1040
https://www.jae.com/en/connectors/series/detail/product/id=64555&type_code=T1040

Fukuden FF Toughler (FK) is a multi-core cable for bending, with a continuous use temperature of 200℃, and excellent heat resistance, flexibility, oil resistance, chemical resistance, and spatter resistance. Excellent bending resistance is achieved by combining thin conductors and FEP (fluororesin) and FR (fluororubber). Compared to fluororesin multi-core cables, it is softer and easier to handle, and demonstrates excellent cable characteristics even under temperature conditions where silicone rubber multi-core cables are insufficient. We sell it in 1m increments of 10m or more at our shop. . Sizes are 0.75SQ, 1.25SQ, 2SQ, and 3.5SQ. Core counts are 2-core, 3-core, and 4-core. The sheath is black. This product is ordered from the manufacturer, so the delivery time is one week. Please order from the product page below.

◇Manufacturer site
https://www.fukuden.co.jp/en/#products

◇Product page
https://nisho-en.ocnk.net/product-list/115

FF Toughler(FK) 0.75SQ×2C

Proterial (formerly Hitachi Metals) UL1015 AWG22 / AWG20 / AWG18 is available in 100m rolls and standard lengths in each color at our shop. Rating: 600V, 105℃. Please visit the product page below to purchase.

◇Product page
UL1015 AWG22
Color: Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White, Black, Pink, Sky Blue
https://nisho-en.ocnk.net/product/1105

UL1015 AWG20
Color: Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White, Black, Pink, Sky Blue
https://nisho-en.ocnk.net/product/1106

UL1015 AWG18
Color: Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White, Black
https://nisho-en.ocnk.net/product/1107


*The cable marking has been changed from HITACHI to PROTERIAL.

UL1015 AWG20 緑　　100m巻

Nikko Electric Wire's UL1015 AWG28 can be sold in units of 1 roll = 305m. Other manufacturers do not offer UL1015 AWG28, AWG26, AWG24, etc. as standard products, but Nikko Electric Wire sells them in units of 1 roll. Stock availability and delivery time vary depending on size and color. Please contact us for a quote. Thank you.

◇Manufacturer's website
https://www.nikko-densen.co.jp/wire_catalog/6201-xxb.html
https://www.nikko-densen.co.jp/solidwire_ul.html

UL1015 AWG28

Inalways is a Taiwanese manufacturer of power connectors (inlets, outlets) established in 1978. Inalways' products are used in equipment such as information, communication, electronic devices, and motors, and supply products to world-famous manufacturers such as Brother, Canon, Dell, Emerson, Flextronic, HP, Mitsumi, NEC Tokin, Pace, Panasonic, Philips, Samsung, Sharp, Sony, ASUS, Lite-On, and Kangshu. We have obtained ISO9002 certification in 1995, ISO9001 certification in 2001, laboratory ISO/IEC 17025 certification, IATF16949 certification, UL, CCC, KC, ENEC, TUV, VPC, Sony Green Partner Eco certification, etc. Our products are RoHS compliant.

◇Products
IEC Connector EN60320
NEMA Receptacle
Power Entry Module
Inlet & Outlet

◇Manufacturer Site
http://www.inalways.com.cn/English/index.asp

OKI Electric Cable UL11527 AWG28 Thin Diameter is a robot cable for moving parts with 1 core (single core) and an insulator outer diameter of 0.60mm. This is the core wire of the ultra-thin robot cable ORP-30F. Polyester elastomer insulated wire, insulator outer diameter 0.60mm, conductor configuration: 49/0.05, rated: 105℃ 30V, RoHS2 compliant. This cable is compatible with each manufacturer's crimp terminals with φ0.5 to 0.6mm. Can be used with JST ACH connector SACH-003G-P0.2, SUH connector SSUH-003T-P0.15, HRS DF52-2832PCF, DF57-2830SCF, DF58-2830SCF, etc. White and black are available in stock from 1m. Harness processing using UL11527 AWG28 φ0.60mm is also possible. Please purchase from the product page below.

Polyester elastomer insulated wire
49/0.05 FRPEL10(U)

UL11527 AWG28 thin diameter
Insulator outer diameter: 0.60mm
Conductor configuration: 49/0.05
Rating: 105℃ 30V
RoHS2 compliant

◇Product page
https://nisho-en.ocnk.net/product/168

Bando Electric Wire's Omron Controller Link cable ESVC 0.5SQ x 2C is sold in our shop in cut lengths of 10m～ and in 1 roll = 100m units. This cable is dedicated to the large-capacity communication network used in the Omron FA Network Controller Link. The normal lead time is one week. Please order from the product page below.

◇Product page
https://nisho-en.ocnk.net/product/1306

Taiwanese manufacturer YEH CHI's 2.54mm pitch UL2651 AWG26 JW2546 jumper cable can be manufactured from a minimum lot of 1,000 pieces. Please specify the insulation length and the strip length at both ends. The stripped part is solder coated. If you are looking for an alternative to Sumitomo Electric's jumper lead flat cable, which has been discontinued, please consider this. The product in the image is 12 cores, stripped dimension 3mm.

◇Jumper wire UL2651 -20 to 105℃ 300V PVC Gray
JW3968 3.96mm pitch AWG18 (7/0.386)
JW2544 2.54mm pitch AWG24 (7/0.203)
JW2546 2.54mm pitch AWG26 (7/0.16)
JW2506 2.50mm pitch AWG26 (7/0.16)
JW2026 2.00mm pitch AWG26 (7/0.16)
JW1506 1.50mm pitch AWG26 (7/0.16)
JW1508 1.50mm pitch AWG28 (7/0.127)
JW1276 1.27mm pitch AWG26 (7/0.16)
JW1278 1.27mm pitch AWG28 (7/0.127)

◇Manufacturer site
https://www.yehchi.com.tw/en/%E8%B7%B3%E7%B7%9Ajumpercable

We sell Kuramo Electric CC-Link Cable FANC-110SBH in cut lengths of 10m～ and in 1 roll = 100m units at our shop. FANC-110SBH is an FA network cable compatible with CC-Link Ver.1.10. The standard type is a cable for fixed parts that is oil-resistant, heat-resistant (75℃), and UL/cUL AWM standard applicable. Please purchase from the product page.

◇Manufacturer site
https://www.kuramo.co.jp/catalog/fa/fanc_110sbh.pdf

◇Product page
https://nisho-en.ocnk.net/product/1285

MOLEX 3.96mm pitch SPOX housing 5195 series wire harness. The product in the image uses 5195-07 for the housing, 5194T for the contacts, and split OKI Electric Cable UL2651 105℃ 300V 3A flat cable FLEX-S 20-7/0.2 7030 2651 for the cable.

◇Housing
2 poles 　09501021 　5195-02
3 poles 　09501031 　5195-03
4 poles 　09501041 　5195-04
5 poles 　09501051 　5195-05
6 poles 　09501061 　5195-06
7 poles 　09501071 　5195-07
8 poles 　09501081 　5195-08
9 poles 　09501091 　5195-09
10poles 　09501101 　5195-10

◇Contacts Tin plated Brass
08701031 　5194T 　Reel
08701030 　5194TL 　Loose

◇Manufacturer site
https://www.molex.com/en-us/part-list/5195
https://www.molex.com/en-us/products/part-detail/08701031