This is an RS-232C cable harness that uses JAE solder type EMI countermeasure DSUB connectors. The product in the image uses DB-25PF-N for the 25-pin plug, DE-9SF-N for the 9-pin socket, metric long screws DB-C8-J10-F4-1R and DE-C8-J9-F4-1R for the cover, and Tatsuta Tachii UL20276 IHPSB AWG28 for the cable.

◇Products
Plugs
DE-9PF-N / DA-15PF-N / DB-25PF-N / DC-37PF-N / DD-50PF-N

Sockets
DE-9SF-N / DA-15SF-N / DB-25SF-N / DC-37SF-N / DD-50SF-N

Cover
DE-C8-J9-F※-1R / DA-C8-J10-F※-1R / DB-C8-J10-F※-1R
DC-C8－J13-F※-1R / DD-C8-J13-F※-1R

◇Manufacturer's website
https://www.jae.com/en/connectors/series/detail/id=64358&type_code=T1060

Tatsuta Tachii Electric Wire's SOFTEC MIC CORD is a highly flexible shielded microphone cord. Sizes are 0.3SQ / 0.5SQ / 0.75SQ. The number of cores is 1 to 4. Sold in units of 1 roll = 100m. Standard delivery time is 1 to 2 weeks. Please order from the product page below.

◇Features
・For microphone, signal lines, etc.
・Excellent flexibility.－More flexible than MVVS series.
・The braided shield reduces the noise.
・Compliant with RoHS2.
*1. This cable is not designed for the tough environment under heat and oil. In such case, U-TKVV series and TKVVBS series are suitable.

◇Manufacturer's website
https://www.tatsuta-tachii.co.jp/en/product/instrumentation_cable/general_instrumentation_cable/softec_miccord/

◇Product Page
https://nisho-en.ocnk.net/product-list/147

SOFTEC MIC CORD 0.3SQ×4C

Hirose Electric Samicon 1600 Solder Type Connector Wire Harness. The product in the image uses the solder type male connector P-1620BA(09) for the connector, the top touch lock type plug case P-1620A-CA(50) for the cover, and the OKI Electric Cable 0.635mm pitch (half pitch) Sudare type flat cable FLEX-S2 26-7/0.1 7030 20028 for the cable.

◇ Solder type male connector
A type silver-plated terminal
P-1608BA(09) / P-1612BA(09) / P-1616BA(09) / P-1620BA(09) / P-1624BA(09)
P-1628BA(09) / P-1634BA(09) / P-1645BA(09) / P-1660BA(09)

◇ Manufacturer site
https://www.hirose.com/en/product/series/1600

JST 2.5mm pitch NH connector wire harness. The product in the image uses H4P-SHF-AA for the housing, SHF-001T-0.8BS for the contacts, and UL1007 AWG24 for the cable. The NH connector base post comes in three types: top, side, and bottom, and allows the wire to be pulled out in three directions: perpendicular (up and down) and parallel to the board.

◇Housing H2P-SHF-AA / H3P-SHF-AA / H4P-SHF-AA / H5P-SHF-AA / H6P-SHF-AA / H7P-SHF-AA H8P-SHF-AA / H9P-SHF-AA / H10P-SHF-AA / H11P-SHF-AA / H12P-SHF-AA / H13P-SHF-AA H14P-SHF- AA / H15P-SHF-AA / H16P-SHF-AA / H18P-SHF-AA / H20P-SHF-AA / H21P-SHF-AA H22P-SHF-AA / H24P-SHF-AA / H25P-SHF-AA

◇Contact
SHF-001T-0.8BS AWG28-22 φ1.2-1.7
SHF-002T-0.8BS AWG30-28 φ0.9-1.2

◇Manufacturer site
https://www.jst-mfg.com/product/index.php?series=182

Ninomiya Electric Wire Industry's VX Super V bending-resistant, twist-resistant compensating wire is sold in units of 100m at our shop. Standard delivery time is 1-2 weeks. Maximum operating temperature: 90°C. VX Super V is a VX (KCB) compensating wire used as lead wire for K (chromel-alumel) thermocouples that conforms to JIS C1610. It has excellent flexibility, including resistance to bending and twisting, and is suitable for wiring moving parts such as injection molding machines and robots. Please order from the product page below.

◇Manufacturer's site
https://ninomiya-ew.co.jp/en/product/tew_vxsv/

◇Product page
https://nisho-en.ocnk.net/product/1344

This is a wire harness for MOLEX SATA connector 67582-0000 (1.27mm pitch housing Serial ATA power cable receptacle 15 poles) and contact 67581-0000. This contact is crimped by adjusting a similar applicator rather than a dedicated applicator. Cables AWG22 to 18 can be used. The product in the image uses UL1007 AWG18 for the cable.

◇Manufacturer site
Housing: 67582-0000
https://www.molex.com/molex/products/part-detail/crimp_housings/0675820000

Contact: 67581-0000
https://www.molex.com/molex/products/part-detail/crimp_terminals/0675810000

This is a wire harness for the JST 2.0mm pitch 2-row board-to-wire connector PHD series. The product in the image uses PHDR-08VS for the housing, SPHD-001T-P0.5 for the contacts, and UL1007 AWG24 for the cable, all twisted together.

◇Housing
PHDR-08VS / PHDR-10VS / PHDR-12VS / PHDR-14VS / PHDR-16VS
PHDR-18VS / PHDR-20VS / PHDR-22VS / PHDR-24VS / PHDR-26VS
PHDR-28VS / PHDR-30VS / PHDR-32VS / PHDR-34VS

◇Contact
SPHD-002T-P0.5 AWG28-24 φ0.9-1.5
SPHD-001T-P0.5 AWG26-22 φ1.0-1.5

◇Manufacturer's website
https://www.jst-mfg.com/product/index.php?series=201

Tonegawa Metal Industry JASO Jack Harness, a coaxial cable harness using a JASO jack, an antenna terminal for car radio. The minimum lot is 100 pieces. The standard coaxial cable used is Shikoku Electric Wire 1.5CS-QEHV(TA). JASO is an abbreviation for Japanese Automobile Standard Organization, a standard established by the Japan Society of Automotive Engineers (JSAE) that defines the technical specifications of automobiles and related parts as a group standard. It is used as a conversion cable for car navigation and car audio. It is also possible to attach a different connector to the other side.

◇Standard cable: Shikoku Electric Wire 1.5CS-QEHV(TA)
https://www.shikokucable.co.jp/product/automobile/details.html

Tonegawa Metal Industry JASO Plug Coaxial Cable Harness, Car Radio Antenna Terminal Coaxial cable harness using JASO plug. Minimum lot is 100 pieces. Standard delivery time is about 2.5 months. The standard coaxial cable used is Shikoku Electric Wire 1.5CS-QEHV(TA). JASO is an abbreviation for Japanese Automobile Standard Organization, a standard established by JSAE (Japan Automotive Engineering Society) that defines the technical specifications of automobiles and related parts as a group standard. It is used as a conversion cable for car navigation and car audio. It is also possible to attach a different connector to the other side.

◇Standard cable: Shikoku Electric Wire 1.5CS-QEHV(TA)
https://www.shikokucable.co.jp/en/product/automobile/details.html

Sanyo Denko Coaxial Composite Cable, Camera and Power Composite Cable Custom Product, Minimum LOT/100m can be produced. Depending on the product, the minimum LOT/100m may not be possible. Please send us your desired specifications. Thank you.

Manufacturer: Sanyo Denko
Minimum LOT: 100m
Standard delivery time: Approximately 2 months

◇Manufacturer site
https://www.sanyo-denko.co.jp/products/camera/#pl01

◇Production example

75Ω coaxial cable + AWG28(7/0.12)×4C

75Ω coaxial cable + AWG28(7/0.12)×2C

75Ω + AWG22(12/0.18)×2C

1.5C type coaxial cable×6C

Ninomiya Electric Wire provide flat duplex insulated thermocouple wire consisting of a pair of conductors individually glass-yarn served and insulated, and then glass-braid sheathed. Glass, the most common insulating material for resisting heat, is not suitable, however, for use in damp places because of its low insulation resistance.We sell this product in units of 1 roll = 100m at our shop. The standard delivery time is 1 to 2 weeks as this product is ordered from the manufacturer. The product in the image is 0.32 x 1P K-2-H-J2 (K-H). Please order from the address link below.

Duplex Insulated Glass-yarn Braided Thermocouple Wire：Glass H
Max. operating temp:250℃

◇Product page
https://nisho-en.ocnk.net/product-list/127

◇Manufacturer's website
https://ninomiya-ew.co.jp/en/product/tcw_h/

　

0.32×1P K-2-H-J2 (K-H)

Kurabe Silicone Flexible Glass Tube NFG-2C is sold in units of 1 meter. A highly flexible self-extinguishing silicone polymer is applied to a sleeve braided with alkali-free glass fiber and then dried. H-class heat-resistant protective tube. Flame retardant has passed UL1441 VW-1. Please purchase from the product page below.

Sales size: 2mm to 20mm
Sales unit: 1 meter
Delivery time: 1～2 weeks

◇Product page
https://nisho-en.ocnk.net/product-list/142

◇Manufacturer's website
https://www.kurabe.co.jp/en/product/market/market_car/131/

USB2.0 A female-female L=1050mm Ultra-thin cable Outer diameter φ2.5mm Black Sold individually at our shop. The cable is UL2725 AWG30×1P+AWG30×2C+aluminum+shield Outer diameter φ2.5mm. USB2.0 compliant, RoHS2 compliant. There is a diagram of the internal wiring of the cable, so it can be cut and used as a wire harness. The manufacturer is KING LAI, Taiwan. Please order from the product page below.

◇Product
USB2.0 A female-female L=1050mm Ultra-thin cable Outer diameter φ2.5mm Black
UL2725 AWG30×1P+AWG30×2C+aluminum+shield Outer diameter φ2.5mm USB2.0 compliant
RoHS2 compliant

◇Product page
https://nisho.ocnk.net/product/3340

Hirose Electric High Performance Small Circular Connector HR10 Series Cable Harness. The product in the image uses the screw coupling type solder type jack HR10A-10TJ-12P(73) for the connector and the Oki Electric Cable Thin Robot Cable ORP-SL 0.2SQ×6P(2464) for the cable.

◇HRS HR10 Series
https://www.hirose.com/en/product/series/HR10

◇Oki Electric Cable Thin Robot Cable ORP Slim
https://www.okidensen.co.jp/en/prod/cable/robot/

Hirose Electric Slim Relay/DIP Connector DF62 Series Wire Harness. The product in the image uses DF62B-4EP-2.2C(10) mold color: white for the housing, DF62-EP2428PCF for the contacts, and UL2464 AWG24 for the cable.

◇Plug housing Standard type
Mold color: Black
DF62B-2EP-2.2C / DF62B-3EP-2.2C / DF62B-4EP-2.2C / DF62B-5EP-2.2C
DF62B-6EP-2.2C / DF62B-7EP-2.2C / DF62B-13EP-2.2C / DF62B-24EP-2.2C

Mold color: White
DF62B-2EP-2.2C(10) / DF62B-3EP-2.2C(10) / DF62B-4EP-2.2C(10) / DF62B-5EP-2.2C(10)
DF62B-6EP-2.2C(10) / DF62B-7EP-2.2C(10) / DF62B-13EP-2.2C(10) / DF62B-24EP-2.2C(10)

◇Contact
DF62-EP22PCF
DF62-EP2428PCF

◇Manufacturer site
https://www.hirose.com/en/product/series/DF62

TE (Tyco Electronics) Commercial MATE-N-LOK 5.08mm pitch power connector 4 poles Housing: 1-0480424-0 and Contact: 170120-1 Wire harness. The cable uses UL1007 AWG18. TE 1-0480424-0 is a connector for connecting the power supply unit and secondary power circuits such as HDD.

◇ TE Commercial MATE-N-LOK
Housing: 1-0480424-0
Contact: 170120-1
https://www.te.com/en/product-1-480424-0.html

This is a patch cable using OKI Electric Cable 4P TPMC-C5e350. 4P TPMC-C5e350 is a Category 5E compatible AWG24 (7/0.2mm) twisted wire type LAN cable. It comes in nine colors: green (G), blue (B), red (R), orange (O), yellow (Y), purple (V), white (W), gray (S), and dark blue (DB). The cable itself is sold in units of 250m per box at our shop. The RJ45 modular plug in the image uses PUNDUIT MP588-C.

◇Oki Electric Cable 4P TPMC-C5e350
https://www.okidensen.co.jp/jp/prod/cable/lan/cate5e_n.html

◇Product page
https://nisho.ocnk.net/product/863

This is a wire harness for MOLEX 2.5mm pitch relay plug housing 5240. The product in the image uses 5240-021 without ears for panel mounting for the housing, 5241T for the contacts, and UL1007 AWG22 for the cable.

◇Housing
With ears for panel mounting
5240-02 / 5240-03 / 5240-04 / 5240-05 / 5240-06 / 5240-07
5240-08 / 5240-09 / 5240-10 / 5240-11 / 5240-12
Without ears for panel mounting
5240-021 / 5240-031 / 5240-041 / 5240-051 / 5240-061 / 5240-071
5240-081 / 5240-091 / 5240-101 / 5240-111 / 5240-121

◇Contact AWG22-28 Φ1.15-1.9mm
5241T Reel
5241TL Bag

◇Manufacturer site
Housing 5240
https://www.molex.com/en-us/products/part-detail/29110023

Contact 5241
https://www.molex.com/en-us/products/part-detail/08700102

Oki Electric Cable High density pressure welding thin diameter I/O cable UL20276 AWG28 VX10-SV Customized cable can be produced from a minimum LOT/300m. VX10 is a cable with an insulator outer diameter of Φ0.58mm. It can be produced with the number of cores, outer jacket color, and insulator color specified by the customer. The product in the image is produced with an outer jacket color of gray, 4 cores, and the insulator color specified by the customer. Other custom cables can also be produced. Please contact us via inquiry. Thank you.

◇Manufacturer's site
https://www.okidensen.co.jp/en/prod/cable/tashin/saikei_io_cable.html

◇Standard product
https://nisho-en.ocnk.net/product-list/11

DaeilCST is a Korean manufacturer of insulating sleeves and caps established in 1986. Since its establishment, it has produced over 500 types of flexible PVC products, including BOOTS mounting parts for connecting BUS-BARs in high-voltage distribution boards, PVC coatings for protective tubes for connecting electrical grounding conductors in extra-high-voltage cables, silicone sleeves for electrical insulation and protection in automobile and bicycle parts, automobiles, electronic devices and tools, and various electronic products, various rubber packings including PVC sleeves, PVC covers, PVC caps, and PVC coatings for various metal products. DaeilCST has strengthened the quality stability and reliability of its products through practical design and design registration for various products, 94V-O certification, UL/CSA 105℃ 600V certification, and ISO/KS A 9001 quality system certification.

◇Products
PVC sleeves
Terminal Caps
Boots
PVC caps
PVC covers
PVC coating
Rubber
Housing covers

◇Manufacturer site
http://www.daeilcst.co.kr/

◇Catalog