This is a Hirose Electric half-pitch (1.27mm pitch) interface connector DX*M series cable harness. The product shown in the image uses the DX30AM-36P loose wire insulation displacement type (for thin wires) connector, the DX30M-36-CV(10) overmolded cover, and the Proterial UL20276-SB(MA) 18P x 28AWG (7/0.127) LF thin diameter φ0.58 cable.

◇Connector
DX30AM-14P / DX30AM-20P / DX30AM-26P / DX30AM-36P / DX30AM-50P
DX30AM-68P / DX30AM-80P / DX30AM-100P / DX30AM-110P

◇One-Touch Lock Type Cover
DX30M-14-CV(10) / DX30M-20-CV(10) / DX30M-26-CV(10)
DX30M-36-CV(10) / DX30M-50-CV(10) / DX30M-68-CV(10)

◇Manufacturer Site
https://www.hirose.com/en/product/series/DX*M

This is a wire harness from Hirose Electric's DF62W series, a simple waterproof, internal wiring slim relay connector. The product shown in the image uses a DF62W-2EP-2.2C housing, DF62W-EP2226PCF contacts, and a UL1007AWG22 cable. The cable is protected with shrink tubing.

◇Products
Crimp Sockets
DF62W-2S-2.2C / DF62W-3S-2.2C / DF62W-4S-2.2C / DF62W-6S-2.2C / DF62W-9S-2.2C
DF62WC-2S-2.2C / DF62WC-3S-2.2C / DF62WC-4S-2.2C / DF62WC-6S-2.2C / DF62WC-9S-2.2C

Crimp Terminals for Sockets
DF62W-2022SCF
DF62W-2226SCF

Crimp Plugs
DF62W-2EP-2.2C / DF62W-3EP-2.2C / DF62W-4EP-2.2C / DF62W-6EP-2.2C DF62W-9EP-2.2C
DF62WC-2EP-2.2C / DF62WC-3EP-2.2C / DF62WC-4EP-2.2C / DF62WC-6EP-2.2C / DF62WC-9EP-2.2C

Plug Crimp Terminal
DF62W-EP2022PCF
DF62W-EP2226PCF

◇Manufacturer Website
https://www.hirose.com/en/product/series/DF62W

OKI Electric Cable's ORP-SL series of thin-diameter, high-flexibility robot cables are available in 100m increments at our shop. This thin-diameter robot cable is an evolution of the ORP Cable series. The core wire uses OKI Electric Cable's proprietary special elastomer for insulation, providing bending durability that can handle any robot movement. For orders of less than 100m, please contact us. Please place your order from the product page below.

◇Manufacturer site
https://www.okidensen.co.jp/en/prod/cable/robot/
https://www.okidensen.co.jp/en/prod/cable/robot/pdf/orp-s.pdf

◇Product page
ORP slim (UL2464) With shielding(SB)
https://nisho-en.ocnk.net/product-list/44

ORP slim (UL2464) Without shielding
https://nisho-en.ocnk.net/product-list/45

ORP slim (UL2464) Layer-twisted Without shielding
https://nisho-en.ocnk.net/product-list/50

ORP-SL 0.1SQ×6P(SB)(2464) 　Twisted pair, shielded

This is a wire harness for the JST 6.2mm pitch wire-to-wire connector VL series (VLR / VLP). The product in the image uses VLP-08V for the housing, SVF-61T-P2.0 for the contacts, and KIV 2.0SQ for the cable.

◇Plug housing for socket contacts
VLP-01V / VLP-02V / VLP-02V-1 / VLP-03V / VLP-03V-1
VLP-04VN-1 / VLP-04V / VLP-04V-1 / VLP-06V / VLP-06V-1
VLP-08V / VLP-08V-1 / VLP-12V / VLP-12V-1

◇Socket contacts
SVF-42T-P2.0
SVF-61T-P2.0
SVF-81T-P2.0

◇Manufacturer site
https://www.jst-mfg.com/product/index.php?series=265

Some of Dyden's robot cables, Robotop DP-SB 300V UL2517 DP3-SB/2517 Shielded products are available for sale in our shop. Standard delivery time is 3-4 days. Sales units are 1m increments of 10m or more. Please visit the product page below to purchase.

◇Normally in stock
Robotop DP3-SB/2517 AWG22(0.3SQ)×2C
Robotop DP3-SB/2517 AWG22(0.3SQ)×3C
Robotop DP3-SB/2517 AWG22(0.3SQ)×4C
Robotop DP3-SB/2517 AWG22(0.3SQ)×6C
Robotop DP3-SB/2517 AWG22(0.3SQ)×8C
Robotop DP3-SB/2517 AWG22(0.3SQ)×20C
Robotop DP3-SB/2517 AWG20(0.5SQ)×2C
Robotop DP3-SB/2517 AWG20(0.5SQ)×3C
Robotop DP3-SB/2517 AWG20(0.5SQ)×4C
Robotop DP3-SB/2517 AWG20(0.5SQ)×6C
Robotop DP3-SB/2517 AWG20(0.5SQ)×8C
Robotop DP3-SB/2517 AWG20(0.5SQ)×10C
Robotop DP3-SB/2517 AWG20(0.5SQ)×12C
Robotop DP3-SB/2517 AWG20(0.5SQ)×20C
Robotop DP3-SB/2517 AWG18(0.75SQ)×2C
Robotop DP3-SB/2517 AWG18(0.75SQ)×3C
Robotop DP3-SB/2517 AWG18(0.75SQ)×4C
Robotop DP3-SB/2517 AWG18(0.75SQ)×5C
Robotop DP3-SB/2517 AWG18(0.75SQ)×8C
Robotop DP3-SB/2517 AWG18(0.75SQ)×10C
Robotop DP3-SB/2517 AWG18(0.75SQ)×12C
Robotop DP3-SB/2517 AWG18(0.75SQ)×16C
Robotop DP3-SB/2517 AWG18(0.75SQ)×20C
Robotop DP3-SB/2517 AWG16(1.25SQ)×2C
Robotop DP3-SB/2517 AWG16(1.25SQ)×3C
Robotop DP3-SB/2517 AWG16(1.25SQ)×4C
Robotop DP3-SB/2517 AWG16(1.25SQ)×6C
Robotop DP3-SB/2517 AWG16(1.25SQ)×16C
Robotop DP3-SB/2517 AWG14(2SQ)×2C
Robotop DP3-SB/2517 AWG14(2SQ)×4C
Robotop DP3-SB/2517 AWG14(2SQ)×6C

◇Manufacturer site
https://cable.dyden.co.jp/products/786/
https://www.dyden.jp/robotcable/list/robotop_dp/

◇Product page
https://nisho-en.ocnk.net/product-list/93

Compliant standards
＜DP3＞
UL758(Appliance Wiring Material) -2517(105℃, 300V)
CSA(CC22.2 No210.2) - (105℃, 300V)
Specific electrical equipment/heat-resistant, earthquake-resistant vinyl cab tire cord (75℃, 300V)

Core identification method

Robotop DP3-SB/2517 AWG18(0.75SQ)×3C

OKI Electric Cable's Cool Stuff Tube Type heat dissipation film is available in sets of 100 or 50 sheets (quantity varies depending on size) at our shop. This is a made-to-order product, so delivery takes 3-4 weeks. Cool Stuff is an innovative heat dissipation film that condenses multiple heat dissipation paths into a single sheet. It can be directly applied to electronic components such as ICs, easily providing heat dissipation where needed. The product shown in the image is the Cool Stuff Tube Type, 40mm x 120mm square. The tube type can be rolled into a tube and attached with the included adhesive tape. Sheet types are also available. Please visit the product page below to order.

◇Manufacturer's Website
https://www.okidensen.co.jp/en/prod/cool/staff.html

◇Product Page
https://nisho-en.ocnk.net/product-list/40


Line up

Examples

Heat emission effectiveness of Cool staff

Standard Specifications

Cool Stuff Tube Type, 40mm x 120mm square.

This is a wire harness for JST 0.8mm pitch Insulation Displacement Connectors (Wire-to-Board type) **SUR-32S. The SUR connector is a compact connector with a PCB mounting height of 1.75mm and a depth of 3.9mm (side) and a PCB mounting height of 3.9mm and a depth of 2.2mm (top). The product in the image uses a 10SUR-32S connector and a Sumitomo Electric UL1867 AWG32 black cable.

◇Connectors
02SUR-32S / 03SUR-32S / 04SUR-32S / 05SUR-32S / 06SUR-32S / 08SUR-32S / 10SUR-32S
12SUR-32S / 14SUR-32S / 15SUR-32S / 16SUR-32S / 17SUR-32S / 20SUR-32S / 22SUR-32S

◇JST SUR series manufacturer site
https://www.jst-mfg.com/product/index.php?series=246

◇Cables
Sumitomo Electric UL1867 AWG32 *Currently only "black" is in stock at the factory
https://sei.co.jp/ewp/J/products/detail/pdf/1_1867_PITCH.pdf

SYMBANG, headquartered in Kaohsiung, Taiwan, is a specialized manufacturer of cooling fans and motors. With over 20 years of experience in modeling and plastic injection molding, the company offers a wide range of AC/DC fans and blowers. Their product development is driven by close collaboration between application and product engineers, utilizing advanced testing equipment to deliver high-performance and customizable cooling solutions.

In terms of quality control, SYMBANG follows standardized production procedures and implements strict inspection processes—including coil winding, stator testing, balance testing, and airflow/pressure testing—ensuring high product reliability. All products meet international safety standards such as UL, TUV, and CE, and the company holds ISO 9001 and ISO 14001 certifications, as well as multiple patents.

SYMBANG’s main product lines include axial fans, cross-flow fans, sirocco fans, centrifugal/turbo fans, fan accessories, mini fans, BLDC motors, thermal modules, and water cooling pumps. Their fans are widely used in printers, PCs, CNC machines, air purifiers, and other devices.

A representative DC fan model is the **D4010-K series**, measuring 40×40×10 mm (1.57"×1.57"×0.39"), available in various voltages and performance specifications to meet diverse application needs.

◇Manufacturer site
https://www.activa.com.tw/index.html

◇D4010-K Series
https://www.activa.com.tw/products_DC_Axial_cooling_fan_D4010-K.html

This is a wire harness for the JST 1.5mm pitch relay connector ZM series. The product shown in the image uses the ZMR-03 housing, SMM-003T-P0.5 contacts, and a Proterial 2-core shielded cable, UL2791-SW/R, 2 x 28AWG (7/0.127) LF.

◇Housing
ZMR-02 / ZMR-03 / ZMR-09 / ZMR-13

◇Contact
SMM-003T-P0.5　 AWG 30-28 　φ0.7-0.9mm

◇Manufacturer's Website
https://www.jst-mfg.com/product/index.php?series=289

This is a wire harness for Hirose Electric's 1.0mm pitch, locking board-to-cable connector DF50 series. The housings are available in double-row and single-row configurations. The product shown in the image uses a double-row socket DF50S-40DS-1C, contacts DF50-2830SCFA, and a UL1061 AWG28 cable.

Double-Row Crimp Sockets
DF50S-20DS-1C / DF50S-30DS-1C / DF50S-40DS-1C / DF50S-50DS-1C

Single-Row Crimp Sockets
DF50A-2S-1C / DF50A-3S-1C / DF50A-4S-1C / DF50A-5S-1C / DF50A-6S-1C
DF50A-7S-1C / DF50A-8S-1C / DF50A-9S-1C / DF50A-10S-1C / DF50A-11S-1C
DF50A-12S-1C / DF50A-13S-1C / DF50A-14S-1C / DF50A-15S-1C DF50A-16S-1C

◇Contact
DF50-2830SCFA 　AWG30-28　 φ0.80-0.88mm

◇Manufacturer's website
https://www.hirose.com/en/product/series/DF50

This is a wire harness for JST ZPD connectors. ZPD connectors are 1.5mm pitch, dual-row, secure-lock connectors. The product shown in the image uses a ZPDR-20V-S housing, SZPD-002T-P0.3 contacts, and a UL1061 AWG26 cable.

◇Housing
ZPDR-10V-S / ZPDR-12V-S / ZPDR-14V-S / ZPDR-16V-S
ZPDR-18V-S / ZPDR-20V-S / ZPDR-22V-S / ZPDR-24V-S
ZPDR-26V-S / ZPDR-28V-S / ZPDR-30V-S / ZPDR-32V-1-Z
ZPDR-34V-1-Z / ZPDR-36V-1-Z / ZPDR-38V-1-Z / ZPDR-40V-1-Z

◇Contact
SZPD-002T-P0.3　 AWG28-24　 Φ0.76-1.2mm

◇Manufacturer's Website
https://www.jst-mfg.com/product/index.php?series=581

This is a flat cable harness for Hirose Electric's 1.27mm pitch (half pitch) connector, the HIF6 series. This connector crimps two 1.27mm pitch flat cables in two layers. The product shown in the image uses the HIF6-26D-1.27R(20) connector and OKI Electric Cable's bridge-type OKIFLEX FLEX-B 14-7/0.127 2651P cable.

◇Connector
HIF6-20D-1.27R(20) / HIF6-26D-1.27R(20) / HIF6-32D-1.27R(20) / HIF6-34D-1.27R(20)
HIF6-40D-1.27R(20) / HIF6-50D-1.27R(20) / HIF6-52D-1.27R(20) / HIF6-60D-1.27R(20)
HIF6-68D-1.27R(20) / HIF6-80D-1.27R(20) / HIF6-100D-1.27R(20)

◇HRS HIF6 Series
https://www.hirose.com/en/product/series/HIF6

◇OKI Electric Cable Bridge-type OKIFLEX
https://nisho-en.ocnk.net/product-list/2

Ninomiya Electric Wire provide flat duplex insulated thermocouple wire consisting of a pair of conductors individually glass-yarn served and insulated, and then glass-braid sheathed. Glass, the most common insulating material for resisting heat, is not suitable, however, for use in damp places because of its low insulation resistance.We sell this product in units of 1 roll = 100m at our shop. The standard delivery time is 1 to 2 weeks as this product is ordered from the manufacturer. The product in the image is 0.1×1P K-2-H-J2 (K-H). Please order from the address link below.

Duplex Insulated Glass-yarn Braided Thermocouple Wire：Glass H
Max. operating temp:250℃

◇Product page
https://nisho-en.ocnk.net/product-list/127

◇Manufacturer's website
https://ninomiya-ew.co.jp/en/product/tcw_h/

　

0.1×1P K-2-H-J2 (K-H)

Ninomiya Electric Wire's silicone rubber insulated wire SR is a heat-resistant wire with excellent heat resistance, cold resistance, and flexibility. SR 600V is available in sizes 0.75SQ, 1.25SQ, 2SQ, 3.5SQ, 5.5SQ, 8SQ, 14SQ, and 22SQ. The standard color is white. 1 roll = 100m. Delivery takes 3-4 days.SR is a standard Ninomiya Electric Wire product and is available in rated voltages of 600V, 300V, 1500V, 3300V, and 6600V.

Silicone rubber has excellent heat resistance, cold resistance, water resistance, and weather resistance, as well as excellent ozone resistance, arc resistance, and corona resistance. Its physical and electrical properties remain stable over a wide temperature range, ensuring reliable performance. It is suitable for general wiring and lead wires in high-temperature environments below 180°C, as well as wiring in moving parts where flexibility is required. However, it is not suitable for applications requiring continuous bending. Please order from the product page below.

◇Manufacturer's website
https://ninomiya-ew.co.jp/en/product/hrw_sr/

◇Product page
https://nisho-en.ocnk.net/product-list/124

SR 600V 5.5SQ

This is a flat cable harness for the KEL 1.27mm pitch low profile connector 8925E / 8925R series. The product in the image uses the connector 8925R-060-179-F without strain relief and the cable Oki Electric Cable High Density 0.635mm Pitch Flat Cable Bridge Type FLEX-B2 60-7/0.1 20028.

◇Connectors
With strain relief:
8925E-020-179-F / 8925E-030-179-F / 8925E-040-179-F / 8925E-050-179-F
8925E-060-179-F / 8925E-068-179-F / 8925E-080-179-F / 8925E-100-179-F

Without strain relief:
8925R-020-179-F / 8925R-030-179-F / 8925R-040-179-F / 8925R-050-179-F
8925R-060-179-F / 8925R-068-179-F / 8925R-080-179-F / 8925R-100-179-F

◇KEL 8925E series manufacturer site
https://www.kel.jp/product/product_detail/id=490&p_cont=49

◇Oki Electric Cable 0.635mm half pitch Okiflex (UL20028) manufacturer site
https://www.okidensen.co.jp/en/prod/cable/flat/koumitsudo_okiflex.html

3.5mm 3-pole L-shaped stereo mini plug integrally molded cable harness. Made in Japan. The product in the image uses a gold-plated 3.5mm 3-pole L-shaped stereo mini plug for the plug and a shielded ultra-thin flexible cable for the cable.

Ninomiya Electric Wire Fluororesin-coated thermocouple wire FEP (6F) Maximum operating temperature: 200°C. This is a flat-coated thermocouple wire insulated with fluororesin for each pair of thermocouple conductors and covered with fluororesin as a sheath. We sell it in units of 1 roll = 100m at our shop. The standard delivery time is 3 to 4 days as it is a manufacturer-ordered item. The product in the image is 0.2×1P T-2-6F-J2 (T-6F). Please order from the address link below.

◇Manufacturer's site
https://ninomiya-ew.co.jp/en/product/tcw_fep/

◇Product page
https://nisho-en.ocnk.net/product-list/128

　

0.2×1P T-2-6F-J2 (T-6F)

Hirose Electric 2.0mm pitch 2-row connector DF11 series cable harness. The product in the image uses DF11-4DS-2C for the housing, DF11-2428SCFA(04) for the contacts, and AWG22×3C shielded flexible cable for the cable.

◇Socket housing
DF11-4DS-2C / DF11-6DS-2C / DF11-8DS-2C / DF11-10DS-2C / DF11-12DS-2C
DF11-14DS-2C / DF11-16DS-2C / DF11-18DS-2C / DF11-20DS-2C / DF11-22DS-2C
DF11-24DS-2C / DF11-26DS-2C / DF11-28DS-2C / DF11-30DS-2C / DF11-32DS-2C

◇Socket contact　AWG28-24　φ0.9-1.45mmmm
DF11-2428SCF　　　 (Tin plated)
DF11-2428SCFA(04)　(Gold plated)

◇Manufacturer site
https://www.hirose.com/en/product/series/DF11

JST 2.0mm pitch, crimp type, 2-row, secure lock PUD connector cable harness for board-to-wire connection. The product in the image uses PUDP-10V-S for the housing, SPUD-002T-P0.5 for the contact, and OKI Electric Cable thin robot cable ORP-SL0.2SQ×5P(2464) for the cable.

◇Housing
PUDP-08V-S / PUDP-10V-S / PUDP-12V-S / PUDP-14V-S / PUDP-16V-S / PUDP-18V-S / PUDP-20V-S
PUDP-22V-S / PUDP-24V-S / PUDP-26V-S / PUDP-28V-S / PUDP-30V-S / PUDP-32V-S / PUDP-34V-S
PUDP-36V-S / PUDP-38V-S / PUDP-40V-S

◇Contact
SPUD-002T-P0.5 AWG28-24 φ0.76-1.5
SPUD-001T-P0.5 AWG26-22 φ0.95-1.5

◇Manufacturer site
JST PUD
https://www.jst-mfg.com/product/index.php?series=471

Oki Electric Cable ORP Slim Thin-diameter robot cable
https://www.okidensen.co.jp/en/prod/cable/robot/
https://www.okidensen.co.jp/en/prod/cable/robot/pdf/orp-s.pdf

JST 1.5mm pitch ZHR connector wire harness. The ZHR connector is a small connector with a mounting height of 5.9mm and a thickness of 3.5mm. The housing in the image is ZHR-6, the contacts are SZH-002T-P0.5, and the cable is UL1571 AWG28.

◇Housing
ZHR-2 / ZHR-3 / ZHR-4 / ZHR-5 / ZHR-6 / ZHR-7
ZHR-8 / ZHR-9 / ZHR-10 / ZHR-11 / ZHR-12 / ZHR-13

◇Contact
SZH-002T-P0.5　AWG28-26　0.8-1.1mm
SZH-003T-P0.5　AWG32-28　0.5-0.9mm

◇Manufacturer site
https://www.jst-mfg.com/product/index.php?series=287