This is a wire harness for Sato Parts Chip Jack Measurement Terminal Banana Plug Solder Type TJ-2167. The product in the image uses TJ-2167-R (red) and TJ-2167-B (black) banana plugs and UL1007 AWG16 cable.

◇Manufacturer's website
https://www.satoparts.co.jp/ENG/products/search/T_TJ/TJ-2167

We sell Ninomiya Electric Wire Industry's Silica-glass-yarn braided nickel-clad copper-conductor wire: TN430 in our shop, cut products = 10m or more in 1m increments, and fixed length 1 roll = 100m. Sizes are 0.75SQ, 1.25SQ, 2.0SQ, 3.5SQ, and 5.5SQ. TN430 is a heat-resistant wire with a nickel-clad copper conductor that is flexible and has excellent heat resistance and corrosion resistance, wrapped with a glass-mica-polyimide composite tape, and coated with silica glass fiber. The insulator is coated with polyimide paint (brownish brown) that has excellent insulating properties. RoHS2 compliant, maximum operating temperature: 400℃. Please purchase from the product page below.

◇Manufacturer site
https://ninomiya-ew.co.jp/en/product/hrw_tn430/

◇Product page
https://nisho-en.ocnk.net/product-list/123


■ Silica-glass-yarn braided Nickel-clad-copper-conductor Wire: TN430
　　
Compliant with RoHS2
Max. operating temp:400℃

TN430 is a super heat-resistant wire, the conductors of which are heat-resistant and corrosion-resistant as well as flexible nickel-clad-copper-conductor wire wrapped in glass-mica-polyimide-composite tape coated with silica-glass fiber. Polyimide coating, which is brownish-red and excels in insulating characteristics, is applied to the insulation of TN430. TN430 is manufactured according to the NINOMIYA Standards.

Features of nickel-clad-copper-conductor wire
The conductor resistance of nickel-clad-copper-conductor wire is about a quarter (1/4) of that of nickel-conductor wire; therefore the former can be thinner in diameter and lighter than the latter while the allowable current value of the former is the same as that of the latter.
Since nickel-clad-copper-conductor wire is more flexible than nickel-conductor wire, it can be easily processed and routed.
The nickel plate is 20 to 30 times as thick as conventional nickel plate (1 to 5μm). Note that the area ratio between nickel and copper is about 28:72.
Since the surface of nickel-clad-copper-conductor wire is nickel, it is more corrosion-resistant than copper wire.
Its electric conductivity changes over time in high temperature use. However, about 60% of the electric conductivity is maintained even after the nickel-clad-copper-conductor wire is used at a temperature of 400℃ for three consecutive years.

Applications
TN430 is used for applications such as the lead wire in an electric heater, which must be highly resistant to heat as well as corrosion, and wire in high-temperature equipment.

TN430 0.75SQ

TN430 2.0SQ

TN430 3.5SQ

Proterial (ex-Hitachi Metals) UL1007 AWG28 / AWG26 / AWG24 / AWG22 / AWG20 / AWG18 are available in various colors at our shop in 100m rolls and standard lengths of 610m. Ratings: 300V, 80℃. Please visit the product page below to purchase.

◇Product page
UL1007 AWG28
Color: Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White, Black
https://nisho-en.ocnk.net/product/1099

UL1007 AWG26
Color: Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White, Black
https://nisho-en.ocnk.net/product/1100

UL1007 AWG24
Color: Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White, Black, Pink, Sky Blue
https://nisho-en.ocnk.net/product/1101

UL1007 AWG22
Color: Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White, Black, Pink, Sky Blue
https://nisho-en.ocnk.net/product/1102

UL1007 AWG20
Colors: Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White, Black
https://nisho-en.ocnk.net/product/1103

UL1007 AWG18
Colors: Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White, Black
https://nisho-en.ocnk.net/product/1104


The printing on the cable has been changed to Proterial instead of Hitachi.

UL1007 AWG18 Red 100m rolls

Fukuden FF Toughler (FK) is a multi-core cable for bending with a continuous use temperature of 200℃, which has excellent heat resistance, flexibility, oil resistance, chemical resistance, and spatter resistance. Excellent bending resistance is achieved by combining thin conductors and FEP (fluororesin) and FR (fluororubber). Compared to fluororesin multi-core cables, it is softer and easier to handle, and it exhibits excellent cable characteristics even under temperature conditions where silicone rubber multi-core cables are insufficient. We sell it in 1m increments of 10m or more at our shop. . Sizes are 0.75SQ, 1.25SQ, 2SQ, and 3.5SQ. The number of cores is 2, 3, and 4. The sheath is black. Since this is a manufacturer-ordered item, the delivery time is one week. Please order from the product page below.

◇Manufacturer site
https://www.fukuden.co.jp/en/#products

◇Product page
https://nisho-en.ocnk.net/product-list/115

FF Toughler(FK) 0.75SQ×2C

This is a coaxial connector wire harness from Japan Eleparts. The connectors in the image are RP-SMA plug, RP-SMA jack, and the cable is RG174. RP-SMA is designed to be incompatible with standard SMA connectors in reverse polarity to comply with US FCC regulations that prevent users from attaching non-standard types of antennas to wireless devices. The difference between standard SMA and RP-SMA is that the SMA plug is a male pin, but the RP-SMA plug is a female socket. The SMA jack is a female socket, but the RP-SMA jack is a male pin.

◇Manufacturer site
https://eleparts.co.jp/


RP-SMA Plug

RP-SMA Jack

Difference between SMA and RP-SMA

Tonichi Kyosan Flat Braided Tin Plated Copper Wire TBC We sell cut pieces in 1m units and fixed lengths of 100m in our shop. Tohnichi Kyosan sizes are 5.5SQ / 8.0SQ / 14SQ / 22SQ / 38SQ / 60SQ / 100SQ. Meiko Futaba sells 1.25SQ / 2.0SQ / 3.5SQ. The normal lead time is 1 week. Flat braided copper wire is used as an electrical conductor or electromagnetic shield, which requires flexibility. Please order from the product page below.

◇Manufacturer site
https://www.tonichi-kyosan.co.jp/product/insulation_tbc/index.html

◇Product page
https://nisho-en.ocnk.net/product-list/148

TBC 5.5SQ

TBC 14SQ

TBC 22SQ

Hirose Electric MIL standard compliant ribbon cable connector HIF3B series flat cable harness. The product in the image uses the HIF3BA-34D-2.54R(63) connector and the Oki Electric Cable 1.27mm pitch bridge type FLEX-B 34-7/0.127 2651P flat cable.

◇Connector
HIF3BA-10D-2.54R(63) / HIF3BA-14D-2.54R(63) / HIF3BA-16D-2.54R(63)
HIF3BA-20D-2.54R(63) / HIF3BA-26D-2.54R(63) / HIF3BA-30D-2.54R(63)
HIF3BA-34D-2.54R(63) / HIF3BA-40D-2.54R(63) / HIF3BA-50D-2.54R(63)
HIF3BB-50D-2.54R(63) / HIF3BA-60D-2.54R(63) / HIF3BB-60D-2.54R(63)
HIF3BA-64D-2.54R(63) / HIF3BB-64D-2.54R(63)

◇Manufacturer site
HRS HIF3B series
https://www.hirose.com/ja/product/series/HIF3B

This is a wire harness for the CB01 series, a 2.5mm pitch waterproof connector for relays from Minebea Connect (formerly Sumiko Tech). The CB01 series is a small, highly reliable 2.5mm pitch waterproof connector. The terminal is pressed into the wire seal built into the connector and held in place by a retainer to ensure waterproofing. The product in the image uses CB01A5-03B0-02 for the relay M housing, CB01C5-020A for the M terminal, CB01E0-01N0 for the waterproof plug, and UL1007 AWG22 for the cable. The cable is covered with a shrink tube.

M housing　　　　　　　　　　　　　　　　　　　　　　　Wire seal
CB01A5-02B0-01 / CB01A5-03B0-01 / CB01A5-05B0-01　φ1.0～1.3 Yellow
CB01A5-02B0-02 / CB01A5-03B0-02 / CB01A5-05B0-02　φ1.3～1.7 Orange
M terminal
CB01C5-010A　AWG22～28　φ1.6 max　M
CB01C5-020A　AWG20～22　φ1.7 max　M

◇Manufacturer site
https://www.minebea-c.com/product/waterproof-connetctor/
https://www.minebea-c.com/.assets/MCI_waterproof_CB01.pdf

This is a flat cable harness for the KEL 1.27mm pitch low profile connector 8925E / 8925R series. The product in the image uses the connector 8925R-050-179-F without strain relief and the cable Oki Electric Cable High Density 0.635mm Pitch Flat Cable Bridge Type FLEX-B2 50-7/0.1 20028.

◇Connectors
With strain relief:
8925E-020-179-F / 8925E-030-179-F / 8925E-040-179-F / 8925E-050-179-F
8925E-060-179-F / 8925E-068-179-F / 8925E-080-179-F / 8925E-100-179-F

Without strain relief:
8925R-020-179-F / 8925R-030-179-F / 8925R-040-179-F / 8925R-050-179-F
8925R-060-179-F / 8925R-068-179-F / 8925R-080-179-F / 8925R-100-179-F

◇KEL 8925E series manufacturer site
https://www.kel.jp/product/product_detail/id=490&p_cont=49

◇Oki Electric Cable 0.635mm half pitch Okiflex (UL20028) manufacturer site
https://www.okidensen.co.jp/en/prod/cable/flat/koumitsudo_okiflex.html

Dyden Robotop DP-SB 300V UL2517 DP3-SB/2517 with shield, some products are sold in our shop. Standard delivery time is 1-2 weeks. Sales units are 5m units of 10m or more. Please purchase from the product page below.

◇Normally in stock
ROBOTOP DP3-SB/2517 AWG22(0.3SQ)×2C
ROBOTOP DP3-SB/2517 AWG20(0.5SQ)×3C
ROBOTOP DP3-SB/2517 AWG18(0.75SQ)×2C
ROBOTOP DP3-SB/2517 AWG18(0.75SQ)×3C
ROBOTOP DP3-SB/2517 AWG18(0.75SQ)×4C
ROBOTOP DP3-SB/2517 AWG16(1.25SQ)×2C
ROBOTOP DP3-SB/2517 AWG14(2SQ)×4C

◇Manufacturer site
https://cable.dyden.co.jp/products/786/
https://www.dyden.jp/robotcable/list/robotop_dp/

◇Product page
https://nisho-en.ocnk.net/product-list/93

Compliant standards
＜DP3＞
UL758(Appliance Wiring Material) -2517(105℃, 300V)
CSA(CC22.2 No210.2) - (105℃, 300V)
Specific electrical equipment/heat-resistant, earthquake-resistant vinyl cab tire cord (75℃, 300V)

Core identification method

This is a wire harness for JST ultra-small 0.8mm pitch SUH connector for board-to-wire. Housings are available with handle: SUHR-**V-S-B and without handle: SUHR-**V-S. The product in the image uses SUHR-04V-S-B for the housing, SSUH-003T-P0.15 for the contacts, and OKI Electric Cable thin diameter for movable parts UL11527 AWG28 Φ0.6mm for the cable.

◇Housing
With handle:
SUHR-02V-S-B / SUHR-03V-S-B / SUHR-04V-S-B / SUHR-05V-S-B / SUHR-06V-S-B / SUHR-08V-S-B
SUHR-10V-S-B / SUHR-12V-S-B / SUHR-14V-S-B / SUHR-16V-S-B / SUHR-17V-S-B / SUHR-20V-S-B

Without handle:
SUHR-02V-S / SUHR-03V-S / SUHR-04V-S / SUHR-05V-S / SUHR-06V-S
SUHR-10V-S / SUHR-12V-S / SUHR-14V-S / SUHR-16V-S / SUHR-20V-S

◇Contact AWG32-28 φ0.5-0.6
SSUH-003T-P0.15

◇JST SUH Connector
https://www.jst-mfg.com/product/detail.php?series=605

◇Oki Electric Cable UL11527 AWG28 Thin Outer Diameter 0.60mm Product Page
https://nisho-en.ocnk.net/product/168

This is an integrally molded cable harness for a 2.5mm 3-pole straight stereo mini plug. The product in the image uses a 2.5mm 3-pole straight stereo mini plug for the plug and Nagaoka Electric Wire CIC-HR 0.2SQ×2C for the cable. The CIC-HR cable is oil-resistant, heat-resistant, flame-retardant, and non-migratory.

◇Nagaoka Electric Wire CIC-HR / SCIC-HR
https://www.e-nagaoka.com/hinmoku/cic-hr/index.htm

Minebea Connect (formerly Sumitomo Tech) 5.8mm pitch relay waterproof connector CL07D series wire harness. The CL07D series is a dustproof and waterproof connector (IP67 certified product) that supports high current (10AMax) with a 5.8mm pitch. The product in the image uses relay M housing CL07D02M for the connector, 215001-2M for 0.3 to 0.5SQ (AWG22 to 20) for the terminal, WS07MF-0A for the wire seal, and UL1007 AWG22 for the cable.

◇M housing for relay
CL07D01M / CL07D02M / CL07D03M

◇Manufacturer site
https://www.minebea-c.com/.assets/cl07dge.pdf

This is a wire harness for KEL's 1.27mm pitch low profile connector 8925E / 8925R series. The product in the image uses the connector with strain relief 8925E-080-179-F and the cable Oki Electric Cable .635mm pitch flat cable bridge type FLEX-B2 80-7/0.1 20028.

◇Connectors
With strain relief:
8925E-020-179-F / 8925E-030-179-F / 8925E-040-179-F / 8925E-050-179-F
8925E-060-179-F / 8925E-068-179-F / 8925E-080-179-F / 8925E-100-179-F

Without strain relief:
8925R-020-179-F / 8925R-030-179-F / 8925R-040-179-F / 8925R-050-179-F
8925R-060-179-F / 8925R-068-179-F / 8925R-080-179-F / 8925R-100-179-F

◇KEL 8925E series manufacturer site
https://www.kel.jp/product/product_detail/id=490&p_cont=49

◇Oki Electric Cable 0.635mm half pitch Okiflex (UL20028) manufacturer site
http://www.okidensen.co.jp/en/prod/cable/flat/koumitsudo_okiflex.html

JST 2.0mm pitch 2-row secure lock board-to-wire PAD connector wire harness. The product in the image uses PADP-12V-1-S for the housing, SPH-001T-P0.5L for the contacts, and UL1007 AWG22 for the cable.

◇Housing
PADP-10V-1-S / PADP-12V-1-S / PADP-14V-1-S / PADP-16V-1-S
PADP-20V-1-S / PADP-22V-1-S / PADP-24V-1-S / PADP-40V-1-S

◇Contacts
SPH-001T-P0.5L AWG26-22 φ1.0-1.5
SPH-002T-P0.5L AWG28-24 φ0.8-1.5

SPND-001T-C0.5 AWG26-22 φ1.0-1.5
SPND-002T-C0.5 AWG28-24 φ0.76-1.5
*Improved insertion/removal workability type

◇Manufacturer site
https://www.jst-mfg.com/product/index.php?series=191

Bando Electric Wire's Omron Controller Link cable ESVC 0.5SQ×2C is sold in our shop in cut lengths of 10m or more in 1m increments and in 1 roll = 100m increments. This cable is dedicated to high-capacity communication networks used in Omron FA network controller links. The normal lead time is one week. Please order from the product page below.

◇Product page
https://nisho-en.ocnk.net/product/1306

Nikko Electric Wire Industries NSKVG (unshielded) and NSKVG-S (shielded) are flexible, bendable, non-migratory, heat-resistant, cold-resistant (+90℃ to -35℃), and oil-resistant cables. Suitable for internal and external wiring of measuring instruments, communication devices, etc. RoHS2 compliant.

Size: 0.2SQ, 0.3SQ, 0.5SQ
Number of cores: 2 to 60 cores

◇Product page
NSKVG Unshielded
https://nisho.ocnk.net/product-list/372

NSKVG-S Shielded
https://nisho.ocnk.net/product-list/373

Sensor NSKVG
https://nisho.ocnk.net/product-list/374

◇Catalog

NSKVG-S 0.2SQ×4C

NSKVG 0.2SQ×16C

OKI Electric Cable UL1571 AWG28 white thin diameter outer diameter 0.58mm in stock. Sold in cut lengths starting from 1m. In addition to white, black, red, gray, and blue are also available in 1m increments. The standard UL1571 AWG28 is φ0.88mm, but the thin diameter is φ0.58mm. This is a wire with an insulator outer diameter of φ0.58 used inside the multi-core cable UL20276 AWG28. This cable is compatible with crimp terminals of φ0.5 to 0.6mm from each manufacturer. Can be used with JST ACH connector SACH-003G-P0.2, SUH connector SSUH-003T-P0.15, HRS DF52-2832PCF, DF57-2830SCF, DF58-2830SCF, etc. RoHS2 compliant.

◇Product page
https://nisho-en.ocnk.net/product/167

Hanshin Electric Wire Robot Cable for Wiring Moving Parts, MRC UL20276, UL2464, UL2501 Shielded, Unshielded. Available in fixed lengths of 100m and cut lengths of 1m and up at our shop. The product in the image is MRC UL20276 AWG24×2C. Please visit the product page to purchase.

◇Manufacturer's website
http://www.hanshin-cable.co.jp/

◇Product page
https://nisho-en.ocnk.net/product-list/80

MRC UL20276 AWG24×2C

We sell Proterial (ex- Hitachi Metals) Fluororex Electric Wire 600V LFF Black in our shop. Sizes are 0.5SQ, 0.75SQ, 1.25SQ, 2SQ, 3.5SQ, 5.5SQ, 8SQ, 14SQ, 22SQ, and 38SQ. Normal delivery time is one week. Rated: 200℃, 600V. This electric wire has excellent heat resistance, flexibility, oil resistance, and flame retardancy. Please purchase from the product page below.

◇Product page
https://nisho-en.ocnk.net/product-list/109

600V LFF 2SQ Black